Terminates 2 BRI lines Use with MyPBX SOHO, MyPBX Standard, MyPBX U100, MyPBX U200, and MyPBX U5XX series systems S interface, Signaling EDSS1 (Q.921) Connection via RJ45.This B2 Module, 2 BRI Port is compatible with MyPBX and S-Series PBX. With Yeastar S-Series, all the telephony interfaces are modular and customizable, whether it’s FXS, FXO, ISDN BRI, GSM/3G, or E1/T1/PRI. S20 has two onboard module slots,and S50 supports 4. S100 and S300 require the combination of Expansion Board and Telephony Modules to add telephony interfaces. S100 allows 2 Expansion Boards and S300 supports 3.
Terminates 2 BRI lines
Use with MyPBX SOHO, MyPBX Standard, MyPBX U100, MyPBX U200, MyPBX U5XX series and S-series systems
S interface, Signaling EDSS1 (Q.921)
The Yeastar B2 is a module with 2 BRI ports to terminate two Basic Rate ISDN phone lines.
It can be used in MyPBX SOHO, MyPBX Standard, MyPBX Pro, MyPBX Enterprise and NeoGate TB400.
BRI Parameters
Features
B2 is a module with 2 BRI ports to terminate two BRI lines. It can be used in MyPBX SOHO, MyPBX Standard, MyPBX U100, MyPBX U200, and MyPBX U5XX.
Specifications
Yeastar B2 is a component with 2 BRI ports to allow to go two BRI appearances. It canbe used in YeastarMyPBX SOHO, MyPBXCustomary, MyPBX U100, MyPBX U200, MyPBX U5XX, and S-Series VoIP PBX.Compatible with N412, all MyPBX,and all S-Series models.Yeastar B2 Module is a module with 2 BRI Ports, besides all BRI port chains 2BRI network. This B2 Module, 2 BRI Port is harmonious with MyPBX and S-Series PBX. A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is to be had in a retail store, unless the item was packaged by the manufacturer in non-retail packagings, such as Yeastar B2
MasterCard
Pay
stc pay
