The 2018 Computex d&i Design Award-winning HS-453DX features a stylish minimalist appearance while providing maximum multimedia performance. Powered by an Intel® Celeron® J4115 quad-core processor with HDMI 2.0 (4K @60Hz) output, the HS-453DX allows you to directly enjoy high-quality videos on a 4K HDTV, and fits seamlessly within an existing home theater setup. With a fanless design, the HS-453DX remains quiet under operation, allowing you to fully enjoy a multimedia experience without any distracting noise. The HS-453DX is also designed for high-speed networking, providing both a 10GbE NBASE-T port and hybrid HDD + SSD structure (two SATA 3.5-inch drive bays and two M.2 2280 SATA SSD slots) to empower fast file transfers and the smoothest video streaming experience.
Note: The HS-453DX is only compatible with specific 2.5-inch SATA SSDs and M.2 SATA SSDs. Check SSD compatibility before purchase.
A single five-speed 10GbE NBASE-T RJ-45 connectivity for smoother multimedia streaming and faster file sharing.
HDMI 2.0/1.4 outputs for direct 4K HD media playback. Supports 4K media streaming and transcoding.
Dual M.2 2280 SATA SSD slots for SSD caching. Use with SSD extra over-provisioning for higher NAS performance.
The fanless, low vibration design keeps the HS-453DX cool and quiet while also preventing dust buildup.
Note: To avoid excess vibration and heat generation, it is recommended to use 5400 RPM hard drives or low-temperature/low-noise NAS hard drives with the HS-453DX. Check compatibility list.
Snapshots fully record the system status and data, allowing you to protect files and data from accidental deletion and malware attacks.
Use VJBOD (Virtual JBOD) to expand your storage capacity by using the unused storage of another QNAP NAS. Connect two 4-bay TR-004 USB hardware RAID external enclosures
| CPU | Intel® Celeron® J4115 4-core/4-thread processor, burst up to 2.5 GHz |
| CPU Architecture | 64-bit x86 |
| Graphic Processors | Intel® HD Graphics 600 |
| Floating Point Unit | |
| Encryption Engine | (AES-NI) |
| Hardware-accelerated Transcoding | |
| System Memory | 8 GB SODIMM DDR4 (2 x 4 GB) |
| Maximum Memory | 8 GB (2 x 4 GB) |
| Memory Slot | 2 x SODIMM DDR4 For dual-DIMM configuration, you must use a pair of identical RAM modules. |
| Flash Memory | 4GB (Dual boot OS protection) |
| Drive Bay | 2 x 3.5-inch SATA 6Gb/s, 3Gb/s The system is shipped without HDD. For the HDD compatibility list, please visit https://www.qnap.com/compatibility/ |
| Drive Compatibility | 3.5-inch SATA hard disk drives 2.5-inch SATA hard disk drives 2.5-inch SATA solid state drives |
| Hot-swappable | |
| M.2 Slot | 2 x M.2 2280 SATA 6Gb/s slots |
| SSD Cache Acceleration Support | |
| Gigabit Ethernet Port (RJ45) | 1 |
| 10 Gigabit Ethernet Port | 1 x 10GBASE-T (10G/5G/2.5G/1G/100M) |
| Wake on LAN (WOL) | |
| Jumbo Frame | |
| USB 2.0 port | 2 |
| USB 3.2 Gen 1 port | 3 (1 x USB-C, 2 x USB-A) |
| IR Sensor | (RM-IR004) |
| HDMI Output | 2, HDMI 2.0 (up to resolution 3840 x 2160 @ 60Hz) + HDMI 1.4b (up to 3840 x 2160 @ 30Hz) |
| Audio Input | - (No longer available on units manufactured on or after 2021/1/1) |
| Audio Output | - (The line out jack and speaker are no longer available on units manufactured on or after 2021/1/1) |
| Form Factor | Set-top design |
| LED Indicators | Power/Status, HDD1-2 |
| Buttons | Power, Reset |
| Dimensions (HxWxD) | 43.8 × 404 × 220 mm |
MasterCard
Pay
stc pay
